View SPOD80A_139209.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
SPOD80A SP
80-Channels Dot Matrix Column/Row OLED Driver
JUN. 29, 2001 Version 1.0
SUNPLUS TECHNOLOGY CO. reserves the right to change this documentation without prior notice. Information provided by SUNPLUS TECHNOLOGY CO. is believed to be accurate and reliable. However, SUNPLUS TECHNOLOGY CO. makes no warranty for any errors which may appear in this document. No responsibility is assumed by Contact SUNPLUS TECHNOLOGY CO. to obtain the latest version of device specifications before placing your order.
SUNPLUS TECHNOLOGY CO. for any infringement of patent or other rights of third parties which may result from its use. In addition, SUNPLUS products are not authorized for use as critical components in life support devices/ systems or aviation devices/systems, where a malfunction or failure of the product may reasonably be expected to result in significant injury to the user, without the express written approval of Sunplus.
SPOD80A
Table of Contents
PAGE
1. GENERAL DESCRIPTION.......................................................................................................................................................................... 3 2. FEATURES.................................................................................................................................................................................................. 3 3. PACKAGE ................................................................................................................................................................................................... 3 4. BLOCK DIAGRAM ...................................................................................................................................................................................... 3 5. SIGNAL www..com DESCRIPTIONS ........................................................................................................................................................................... 4 6. FUNCTIONAL DESCRIPTIONS.................................................................................................................................................................. 6 6.1. 12 TYPES OF DRIVING CONFIGURATIONS ................................................................................................................................................ 6 6.2. CURRENT/VOLTAGE DRIVING MODE........................................................................................................................................................ 6 6.3. RELATIONSHIP BETWEEN THE DISPLAY DATA AND DRIVER OUTPUT PINS .................................................................................................. 6 6.4. BRIGHTNESS CONTROL.......................................................................................................................................................................... 7 6.5. INTERNAL DISCHARGE FUNCTION ........................................................................................................................................................... 8 7. ELECTRICAL SPECIFICATIONS ............................................................................................................................................................... 9 7.1. ABSOLUTE MAXIMUM RATINGS ............................................................................................................................................................... 9 7.2. RECOMMENDED OPERATING CONDITIONS............................................................................................................................................... 9 7.3. DC CHARACTERISTICS........................................................................................................................................................................... 9 7.4. AC CHARACTERISTIC............................................................................................................................................................................11 8. APPLICATION CIRCUIT ........................................................................................................................................................................... 12 9. PACKAGE/PAD LOCATIONS ................................................................................................................................................................... 13 9.1. PAD ASSIGNMENT ............................................................................................................................................................................... 13 9.2. ORDERING INFORMATION ..................................................................................................................................................................... 13 9.3. PAD LOCATIONS.................................................................................................................................................................................. 14 10. DISCLAIMER............................................................................................................................................................................................. 16 11. REVISION HISTORY ................................................................................................................................................................................. 17
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
2
JUN. 29, 2001 Version: 1.0
SPOD80A
80-CHANNELS DOT MATRIX COLUMN/ROW OLED DRIVER
1. GENERAL DESCRIPTION
The SPOD80A, an 80-channels dot matrix column/row OLED driver, is fabricated by low power CMOS technology. By incorporating an 80-bit shift register, an 80-bit data latch, and an 80-bit driver, the SPOD80A can drive constant current/voltage to www..com 80 column/row lines simultaneously according to the selection mode and input data.
LD VDD VSS DIO1C DIO1R L/R CP COL/ROW DIO2C DIO2R CV Mode1 Mode2 DISPOFF
4. BLOCK DIAGRAM
80-Bits Shift Register
80-Bits Latch
2. FEATURES
! Shift Clock frequency: 5.0MHz (Max.) (VDD = 2.4V - 5.5V) ! Serial data input ! Current/Voltage driving modes are selectable with CV pin (for column driver only) ! Supply voltage for OLED driver: 9.0V - 16V ! Internal discharge circuit ! Cascade function ! Built-in display off function ! 12 types of driving configurations
O1 ............... O80 VLED VSS2
Floating & Discharge Controller
FLT DIS2 DIS3 DIS4
Level Shifter
Reference Generator
BTV BTR RB1
Driver X 80 (Column / Row)
3. PACKAGE
! Bare chip
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
3
JUN. 29, 2001 Version: 1.0
SPOD80A
5. SIGNAL DESCRIPTIONS
Mnemonic O17 - O1 O40 - O18 O63 - O61 O80 - O64 CP PIN No. 1 - 17 80 -102 55 - 77 32 - 48 24 I Data shift clock. The data is shifted to 80 bits shift register at the falling edge of `CP' when used as column driver. 23 I Data load pulse. When used as a column driver, a row of display data is latched at the falling edge of `LD'. When used as a row driver, `LD' is the shift clock input. DIO1C DIO2C DIO1R DIO2R 25 19 26 20 I/O Series data input/output of column/row driver. 1). When `L/R' = 1, `DIO1C' and `DIO1R' are series data inputs of column driver and row driver respectively. `DIO2C' and `DIO2R' are series data outputs of column driver and row driver respectively. 2). When `L/R' = 0, `DIO2C' and `DIO2R' are series data inputs of column driver and row driver respectively. `DIO1C' and `DIO1R' are series data outputs of column driver and row driver respectively. 3). When `MODE1''Mode2' = 0, `COL/ROW' = 1, SPOD80A is used as dedicated column driver, series data input of row driver, `DIO1R' or `DIO2R' depending on `L/R', should be connected to VSS or float. 4). When `MODE1''Mode2' = 0, `COL/ROW' = 0, SPOD80A is used as dedicated row driver, series data input of column driver, `DIO1C' or `DIO2C' depending on `L/R', should be connected to VSS or float. COL/ROW VDD VSS VLED 51 27 18 54 79 108 VSS2 49 78 103 L/R MODE1 MODE2 CV 50 53 52 22 I I I Selection of data shift direction Mode selection. There are 12 modes can be selected when combine `MODE1', `MODE2' with `COL/ROW' and `L/R'. Selection of driving method, default is `H'. CV = 1, current driving mode CV = 0, voltage driving mode This mode selection is valid when used as column driver only. BTV BTR RB1 28 29 31 I I Brightness control input. By adjusting an external voltage (VBT) and resistor (RBT), the output current in O[1:80] can be adjusted, see function description. This adjustment is valid when used as column driver and CV = 1 only. Internal/external resistor selection. Connect this pin to ground while using internal resistor, or float it when using external resistor GND of OLED driving buffer I Column driver/Row driver selection Power supply of digital circuit GND of digital circuit Power supply of OLED driving buffer Type O Column/Row output Description
www..com
LD
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
4
JUN. 29, 2001 Version: 1.0
SPOD80A
Mnemonic DIS2 DIS3 DIS4 FLT PIN No. 106 105 104 107 I Type I Pulse width control of internal discharge By setting DIS2 - DIS4, the pulse width of internal discharge can be set to be 0, 2, 4, 6, 8, 10, 12, 14 TWCP. Where DIS4 is MSB; DIS2 is LSB. The default value of DIS4, 3, 2 is 010. Output voltage control. While set to `H', the driver will be float when input data is `0'. While set to `L', the driver outputs deselect level (VSS2) when input data is `0'. This mode selection is valid only when used as column driver. The default value is `H'. 21 I Control for output deselect level 1). While set to `L', the driver outputs deselect level (VSS2). 2). While set to `H', the driver outputs constant current/voltage depending on mode selection. VBS 30 Bypass capacitor A 0.1F capacitor connecting to VSS2 is necessary Description
www..com
DISPOFF
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
5
JUN. 29, 2001 Version: 1.0
SPOD80A
6. FUNCTIONAL DESCRIPTIONS
6.1. 12 Types of Driving Configurations
COL/ROW 1 1 1 1 1 www..com 1 0 0 0 0 0 0 Mode1 0/1 0/1 0 0 1 1 1 1 0 0 0/1 0/1 Mode2 0/1 0/1 1 1 0 0 0 0 1 1 0/1 0/1 L/R 1 0 1 0 1 0 1 0 1 0 1 0 O[1:16] COL COL COL ROW COL ROW COL ROW COL ROW ROW ROW O[17:32] COL COL COL COL COL ROW COL ROW ROW ROW ROW ROW O[33:48] COL COL COL COL COL COL ROW ROW ROW ROW ROW ROW O[49:64] COL COL COL COL ROW COL ROW COL ROW ROW ROW ROW O[65:80] COL COL ROW COL ROW COL ROW COL ROW COL ROW ROW
Note: When `Mode1''Mode2' = 0, SPOD80A is used as dedicated column driver or row driver. When `Mode1''Mode2' = 1, SPOD80A is used as column/row driver.
6.2. Current/Voltage Driving Mode
SPOD80A provides two kinds of driving methods, current driving and voltage driving. By setting CV = 'H', outputs programmed to be column driver will source a constant current when input data is `H' ; and will be high impedance or deselect level (VSS2) when input data is `L'. By setting CV = 'L', outputs programmed to be column driver will output select level (VLED) when input data is `H' ; and will be high impedance or deselect level (VSS2) when input data is `L'.
6.3. Relationship between the Display Data and Driver Output PINs 6.3.1. Column driver
COL/ROW Mode1 Mode2 L/R Data In Data Out 1st | 16th 17th Figure of Clock | 32nd 33rd | 48th 49th | Figure of Clock 64th 65th | 80th 1 0/1 0/1 1 DIO1C DIO2C O[80] | O[65] O[64] | O[49] O[48] | O[33] O[32] | O[17] O[16] | O[1] 1 0/1 0/1 0 DIO2C DIO1C O[1] | O[16] O[17] | O[32] O[33] | O[48] O[49] | O[64] O[65] | O[80] 1 0 1 1 DIO1C DIO2C O[64] | O[49] O[48] | O[33] O[32] | O[17] O[16] | O[1] NA NA NA 1 0 1 0 DIO2C DIO1C O[17] | O[32] O[33] | O[48] O[49] | O[64] O[65] | O[80] NA NA NA 1 1 0 1 DIO1C DIO2C O[48] | O[33] O[32] | O[17] O[16] | O[1] NA NA NA NA NA NA 1 1 0 0 DIO2C DIO1C O[33] | O[48] O[49] | O[64] O[65] | O[80] NA NA NA NA NA NA 0 1 0 1 DIO1C DIO2C O[32] | O[17] O[16] | O[1] NA NA NA NA NA NA NA NA NA 0 1 0 0 DIO2C DIO1C O[49] | O[64] O[65] | O[80] NA NA NA NA NA NA NA NA NA 0 0 1 1 DIO1C DIO2C O[16] | O[1] NA NA NA NA NA NA NA NA NA NA NA NA 0 0 1 0 DIO2C DIO1C O[65] | O[80] NA NA NA NA NA NA NA NA NA NA NA NA
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
6
JUN. 29, 2001 Version: 1.0
SPOD80A
6.3.2. Row driver
COL/ROW Mode1 Mode2 L/R Data In Data Out 1st | 16th 17th | 32nd Figure of Clock 33rd | 48th 49th | 64th 65th | 80th 0 0/1 0/1 1 DIO1R DIO2R O[1] | O[16] O[17] | O[32] O[33] | O[48] O[49] | O[64] O[65] | O[80] 0 0/1 0/1 0 DIO2R DIO1R O[80] | O[65] O[64] | O[49] O[48] | O[33] O[32] | O[17] O[16] | O[1] 0 0 1 1 DIO1R DIO2R O[17] | O[32] O[33] | O[48] O[49] | O[64] O[65] | O[80] NA NA NA 0 0 1 0 DIO2R DIO1R O[64] | O[49] O[48] | O[33] O[32] | O[17] O[16] | O[1] NA NA NA 0 1 0 1 DIO1R DIO2R O[33] | O[48] O[49] | O[64] O[65] | O[80] NA NA NA NA NA NA 0 1 0 0 DIO2R DIO1R O[48] | O[33] O[32] | O[17] O[16] | O[1] NA NA NA NA NA NA 1 1 0 1 DIO1R DIO2R O[49] | O[64] O[65] | O[80] NA NA NA NA NA NA NA NA NA 1 1 0 0 DIO2R DIO1R O[32] | O[17] O[16] | O[1] NA NA NA NA NA NA NA NA NA 1 0 1 1 DIO1R DIO2R O[65] | O[80] NA NA NA NA NA NA NA NA NA NA NA NA 1 0 1 0 DIO2R DIO1R O[16] | O[1] NA NA NA NA NA NA NA NA NA NA NA NA
www..com
6.4. Brightness Control 6.4.1. Using internal resistor
VBT ICH = VBT/20K Operation Condition VBT = 1 ~ 5V
6.4.2. Using external resistor
VBT ICH = VBT/Rext BTV
ICH 250
BTV
RB1
BTR
50 1 5
VBT
RB1
BTR Rext
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
7
JUN. 29, 2001 Version: 1.0
SPOD80A
6.5. Internal Discharge Function
SPOD80A supports internal discharge function. An internal discharge pulse will be active at the rising edge of `LD', and be inactive at the falling edge of `CP', the duration of the internal discharge pulse is programmable. By setting DIS2 - DIS4, user can set discharge pulse width to be 0, 2, 4, 6, 8, 10, 12, 14 TWCP, period of shift clock CP. The default value of DIS4 - DIS2 is 010, where DIS2 is LSB; DIS4 is MSB. This function is only valid when used as column driver.
LD
www..com
TWC
P
CP
1
2
3
4
...
14
...
1
DIS
Row N
Row N+1
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
8
JUN. 29, 2001 Version: 1.0
SPOD80A
7. ELECTRICAL SPECIFICATIONS
7.1. Absolute Maximum Ratings
Parameter Supply voltage (Logic) Supply voltage (Driving buffer) Input voltage range Output voltage range Storage temperature www..com Symbol VDD VLED VIN VOUT TSTG Rating -0.5 ~ 7.0 -0.5 ~ 18.0 -0.5 ~ VDD+0.5 -0.5 ~ VDD+0.5 -45.0 to 125.0 Unit V V V V
For normal operational
Note: Stresses beyond those given in the Absolute Maximum Rating table may cause operational errors or damage to the device. conditions see AC/DC Electrical Characteristics.
7.2. Recommended Operating Conditions
Parameter Supply voltage (Logic) Supply voltage (Driving buffer) Operating temperature Symbol VDD VLED TOPR Min. 2.4 9.0 -20.0 Typ. Max. 5.5 16.0 70.0 Unit V V
7.3. DC Characteristics 7.3.1. Column mode
(VSS = VSS2 = 0VVDD = 2.4V - 5.5V; VLED = 16.0V; TOPR = -20 ~ 70) Parameter Symbol VIH Input voltage Conditions VDD = 3.3V Applicable pin DIO1C, L/R, DIO2C, CP, DIO1R, CV, DIO2R, LD, VIL VDD = 3.3V MODE1, FLT, MODE2, COL/ROW, DIS2, DIS3, DIS4, DISPOFF Output voltage (1) VOH1 VOL1 IHIL1 ILIL1 IHIL2 ILIL2 IHIL3 ILIL3 IHIOL ILIOL ICH ICL VCH VCL ICVDD ICVLED ICOFF1 ICOFF2 IOH = -0.2mA IOL = 0.2mA VIN = VDD VIN = VSS VIN = VDD VIN = VSS VIN = VDD VIN = VSS VIN = VDD VIN = VSS VBTV = 5.0V, CV = 'H' CV = 'H', FLT = 'H' CV = 'L', ICH = -0.2mA CV = 'L', ICL = 0.2mA *2 DIO1C, DIO2C, DIO1R, DIO2R L/R, CP, LD, COL/ROW, MODE1, MODE2, DISPOFF CV, DIS3, FLT VDD-0.2 -1.0 -40 -1.0 -2.0 -200 -1.0 VLED-0.3V -250 0.2 1.0 1.0 40 2.0 -300 0.3 1.0 200 1.0 1.0 V V A A A A A A A A A A V V mA A mA A 0.8 V Min. 2.0 Typ. Max. Unit V
Input leakage current (1)
Input leakage current (2)
Input leakage current (3)
DIS2, DIS4 DIO1C, DIO2C, DIO1R, DIO2R *1
I/O leakage current Column ON output current Column OFF output current Column On output voltage Column OFF output voltage Supply current
*1 VDD VLED VDD VLED
Display OFF current
*3
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
9
JUN. 29, 2001 Version: 1.0
SPOD80A
7.3.2. Row mode
(VSS = VSS2 = 0VVDD = 2.4V - 5.5V; VLED = 16.0V; TOPR = -20 ~ 70) Parameter Symbol VIH Input voltage Conditions VDD = 3.3V Applicable pin DIO1C, L/R, DIO2C, CP, DIO1R, CV, DIO2R, LD, VIL VDD = 3.3V MODE1, FLT, MODE2, COL/ROW, DIS2, DIS3, DIS4, DISPOFF VOH VOL IHIL1 ILIL1 IHIL2 ILIL2 IHIL3 ILIL3 IHIOL ILIOL VRH VRL IRVDD IRVLED IROFF1 IROFF2 IOH = -0.2mA IOL = 0.2mA VIN = VDD VIN = VSS VIN = VDD VIN = VSS VIN = VDD VIN = VSS VIN = VDD VIN = VSS IRH = -0.2mA IRL = 48mA (*5) *2 DIO1C, DIO2C, DIO1R, DIO2R, L/R, CP, LD, COL/ROW, MODE1, MODE2, DISPOFF CV, DIS3, FLT VDD-0.2 -1.0 -40 -1.0 -2.0 VLED-0.3 0.2 1.0 1.0 40 2.0 1.92 1.0 150 1.0 1.0 V V A A A A A A A A V V mA A mA A 0.8 V Min. 2.0 Typ. Max. Unit V
www..com
Output voltage
Input leakage current
Input leakage current (2)
Input leakage current (3)
DIS2, DIS4
I/O leakage current Row OFF output voltage Row ON output voltage Supply current
DIO1C, DIO2C, DIO1R, DIO2R
*4 VDD VLED VDD VLED
Display OFF current
*3
Note*1: Depending on the selected mode, the applicable pins will be COL/ROW 1 1 1 1 1 1 0 0 0 0 Mode1 0/1 0/1 0 0 1 1 1 1 0 0 is turned over by CP. Note*3: VDD = 3.0V, fCP = 5.0MHz, No load. The input data is turned over by CP. DISPOFF set to `L'. Mode2 0/1 0/1 1 1 0 0 0 0 1 1 L/R 1 0 1 0 1 0 1 0 1 0 Applicable Pins O[1:80] O[1:80] O[1:64] O[17:80] O[1:48] O[33:80] O[1:32] O[49:80] O[1:16] O[65:80]
Note*4: Depending on the selected mode, the applicable pins will be COL/ROW 1 1 1 1 0 0 0 0 0 0 Mode1 0 0 1 1 1 1 0 0 0/1 0/1 Mode2 1 1 0 0 0 0 1 1 0/1 0/1 L/R 1 0 1 0 1 0 1 0 1 0 Applicable Pins O[65:80] O[1:16] O[49:80] O[1:32] O[33:80] O[1:48] O[17:80] O[1:64] O[1:80] O[1:80]
Note*2: VDD = 3.0V, fCP = 2.08MHz, fLD=12.8KHz, No load. The input data
Note*5: Because of the row driving capability of SPOD80A, the maximum column lines that SPOD80A can drive are 160. That is, there are only 2 SPOD80As can cascade as column drivers when using SPOD80A as row driver.
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
10
JUN. 29, 2001 Version: 1.0
SPOD80A
7.4. AC Characteristic
(VSS = VSS2 = 0V; VDD = 2.4V - 5.5V; VLED = 16.0V; TOPR = -20 ~ 70) Parameter Shift clock period Data latch in setup time Data latch in hold time CP low to LD high LD low to CP low www..com LD `H' pulse width LD low to Row output LD high to column output Output delay time Symbol TWCP TDS TDH TCLLH TLLCL TWLD TLROW TLCOL TDDO Load = 0.6nF *6 CL = 15pF Condition Min. 200 40 40 20 20 100 40 Typ. Max. 9.0 100 Unit ns ns ns ns ns ns s ns ns
T CLLH
LD
T WLD
T LLCL
TWCP
CP
TDS
DIO1/ DIO2
T DH
O[1:80] Row
T LROW
O[1:80] Column
Discharge
X
T LCOL
CP
TDH
DI
T DH
DO T DDO
Note*6: Depending on loading, please refer to DC characteristics.
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
11
JUN. 29, 2001 Version: 1.0
SPOD80A
8. APPLICATION CIRCUIT
VLED 0.1F VDD 0.1F VDD
SPL512A/ SPL130A
www..com
DIP/DL3 LP CP FP LCDENP/LCDEN
DIO1C LD CP DISPOFF
DIO2C L/R Col/Row Mode1/2 CV O80
DIO1C LD CP DISPOFF
DIO2C L/R Col/Row Mode1/2 CV O80
VBS RB1 BTR BTV SPOD80A
VBS RB1 BTR BTV SPOD80A
O1
...
O1
...
DIO1R LD CP DISPOFF
0.1F
VBS BTV BTR RB1 DIO2R L/R Col/Row Mode1/2 CV
SPOD80A O80
O1
... OLED PANEL 160X160
VDD 0.1F DIO1R LD CP DISPOFF VBS BTV BTR RB1 DIO2R L/R Col/Row Mode1/2 CV SPOD80A
...
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
VDD
12
JUN. 29, 2001 Version: 1.0
SPOD80A
9. PACKAGE/PAD LOCATIONS
9.1. PAD Assignment
DISPOFF DIO1R DIO1C DIO2R DIO2C VDD1 VSS1 BTR VBS O80 RB1 BTV O64 O65 O66 O67 O68 O69 O70 O71 O72 O73 O74 O75 O76 O77 O78 O79 O10 O11 O12 O13 O14 O15 O16 O17 108 9 8 7 6 5 4 3 2 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 1 107 Y COL/ROW 51 (0,0) 52 X 105 DIS3 106 DIS2 CP CV
O1
O2
O3
O4
O5
O6
O7
O8
VSS2 L/R
49 50
O9
LD
VLED FLT
MODE2 www..com
100
101
VLED
54 VLED O63 O62 O61 O60 O59 O58 O57 O56 O55 O54 O53 O52 O51 O50 O49 O48 O47 O46 O45 O44 O43 O40 O39 O38 O37 O36 O35 O34 O33 O32 O31 O30 O29 O28 O27 O26 O25 O24 O23 O22 O21 O20 O19 VSS2 O42 O41 O18
102
MODE1
53 74 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
104 103
DIS4 VSS2
Chip Size: 7960m x 1470m PAD Size: 100m x 100m This IC substrate should be connected to VSS
Note1: Chip size included scribe line. Note2: To ensure that the IC function properly, bond all VDD and VSS pins. Note3: The 0.1F capacitor between VDD and VSS should be placed to IC as close as possible.
9.2. Ordering Information
Product Number SPOD80A-nnnnV-C
Note1: Code number (nnnnV) is assigned for customer. Note2: Code number (nnnn = 0000 - 9999); version (V = A - Z).
Package Type Chip form
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
13
JUN. 29, 2001 Version: 1.0
SPOD80A
9.3. PAD Locations
PAD No. 1 2 3 4 5 6 www..com 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 PAD Name O17 O16 O15 O14 O13 O12 O11 O10 O9 O8 O7 O6 O5 O4 O3 O2 O1 VSS1 DIO2C DIO2R DISPOFF CV LD CP DIO1C DIO1R VDD1 BTV BTR VBS RB1 O80 O79 O78 O77 O76 O75 O74 O73 O72 O71 O70 O69 O68 X 3329 3169 3019 2869 2729 2589 2449 2309 2169 2029 1889 1749 1609 1469 1329 1189 1049 909 769 629 489 349 209 69 -71 -211 -351 -491 -631 -771 -911 -1051 -1191 -1331 -1471 -1611 -1751 -1891 -2031 -2171 -2311 -2451 -2591 -2731 Y 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 598 14 PAD No. 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 PAD Name O67 O66 O65 O64 VSS2 L/R COL/ROW MODE2 MODE1 VLED O63 O62 O61 O60 O59 O58 O57 O56 O55 O54 O53 O52 O51 O50 O49 O48 O47 O46 O45 O44 O43 O42 O41 VSS2 VLED O40 O39 O38 O37 O36 O35 O34 O33 O32 X -2871 -3021 -3171 -3331 -3833 -3833 -3833 -3833 -3833 -3833 -3331 -3171 -3021 -2871 -2731 -2591 -2451 -2311 -2171 -2031 -1891 -1751 -1611 -1471 -1331 -1191 -1051 -911 -771 -631 -491 -351 -211 -71 69 209 349 489 629 769 909 1049 1189 1329 Y 598 598 598 598 586 383 127 -128 -384 -588 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 JUN. 29, 2001 Version: 1.0
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
SPOD80A
PAD No. 89 90 91 92 93 94 95 www..com 96 97 98 PAD Name O31 O30 O29 O28 O27 O26 O25 O24 O23 O22 X 1469 1609 1749 1889 2029 2169 2309 2449 2589 2729 Y -600 -600 -600 -600 -600 -600 -600 -600 -600 -600 PAD No. 99 100 101 102 103 104 105 106 107 108 PAD Name O21 O20 O19 O18 VSS2 DIS4 DIS3 DIS2 FLT VLED X 2869 3019 3169 3329 3832 3832 3832 3832 3832 3832 Y -600 -600 -600 -600 -588 -384 -128 127 383 586
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
15
JUN. 29, 2001 Version: 1.0
SPOD80A
10. DISCLAIMER
The information appearing in this publication is believed to be accurate. Integrated circuits sold by Sunplus Technology are covered by the warranty and patent indemnification provisions stipulated in the terms of sale only. SUNPLUS makes no warranty, express, statutory implied or by description regarding the information in this publication or FURTHERMORE, SUNPLUS MAKES NO WARRANTY OF SUNPLUS reserves the right to halt production or alter the specifications and regarding the freedom of the described chip(s) from patent infringement. MERCHANTABILITY OR FITNESS FOR ANY PURPOSE. prices at any time without notice. publication are current before placing orders.
Accordingly, the reader is cautioned to verify that the data sheets and other information in this Products described herein are intended for use in normal commercial applications. Please note that application circuits
Applications involving unusual environmental or reliability requirements, e.g. military equipment or medical life support equipment, are www..com specifically not recommended without additional processing by SUNPLUS for such applications. illustrated in this document are for reference purposes only.
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
16
JUN. 29, 2001 Version: 1.0
SPOD80A
11. REVISION HISTORY
Date APR. 30, 2001 JUN. 29, 2001 Revision # 0.1 1.0 Original 1. Delete "PRELIMINARY" 2. Correct PACKAGE description in the "3. PACKAGE" 3. Correct chip size 4. Add Note1 to Note3 in the "9.1 PAD Assignment" 5. Renew to a new document format 1 13 13 Description Page 11
www..com
(c) Sunplus Technology Co., Ltd. Proprietary & Confidential
17
JUN. 29, 2001 Version: 1.0

▲Up To Search▲

Price & Availability of SPOD80A

	To Download SPOD80A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .